Items where Division is "College of Engineering & Physical Sciences > School of Engineering and Technology > Mechanical, Biomedical & Design" and Year is 2023

Article

Abbakyari, Maryam, Abuzeinab, Amal, Adefila, Arinola, Whitehead, Timothy and Oyinlola, Muyiwa (2023). Designing Sustainable Housing Using a User-Centred Approach: Paipe Case Study. Buildings, 13 (10),

Abdelhady, Ramy, Radwan, Ali, Rezk, Ahmed, Olabi, A.G., Sharma, Vikas, Hossain, A K, Alaswad, Abed and Abdelkareem, Mohammad Ali (2023). Energy and exergy study of the integrated adsorption-absorption system driven by transient heat sources for cooling and desalination. Energy Conversion and Management, 277 ,

Ahmad, Gulzar, Imran, Shahid, Farooq, Muhammad, Shah, Asad Naeem, Anwar, Zahid, Rehman, Ateekh Ur and Imran, Muhammad (2023). Biodiesel Production from Waste Cooking Oil Using Extracted Catalyst from Plantain Banana Stem via RSM and ANN Optimization for Sustainable Development. Sustainability, 15 (18),

Ahmed, Israr, Umer, Jamal, Altamimi, Abdullah, Rana, Ahmad Raza Khan, Khan, Zafar A., Imran, Muhammad, Awais, Muhammad and Alyami, Saeed (2023). A Critical Analysis of the Energy Requirements of a Commercial Building Based on Various Types of Glass Insulations. Sustainability, 15 (4),

Ahmed, Muhammad, Ayub, Abubakr, Sheikh, Nadeem Ahmed, Shahzad, Muhammad Wakil, Haroon, Muhammad and Imran, Muhammad (2023). Thermodynamic optimization and performance study of supercritical CO2 thermodynamic power cycles with dry cooling using response surface method. International Communications in Heat and Mass Transfer, 142 ,

Al-Wreikat, Yazan and Sodré, José Ricardo (2023). Regional Electric Vehicle Energy Consumption and Carbon Emissions in Great Britain. Transportation Research Procedia, 70 , pp. 398-405.

Al-alami, Abdul Hai, Olabi, Abdul Ghani, Mdallal, Ayman, Rezk, Ahmed, Radwan, Ali and Abdelkareem, Mohammad Ali (2023). Concentrating solar power (CSP) technologies: Status and analysis. International Journal of Thermofluids, 18 , p. 100340.

Albahkali, Thamer, Fouly, Ahmed, Alnaser, Ibrahim A., Elsheniti, Mahmoud B., Rezk, Ahmed and Abdo, Hany S. (2023). Investigation of the Mechanical and Tribological Behavior of Epoxy-Based Hybrid Composite. Polymers, 15 (19),

Amaitik, Nasser, Zhang, Ming, Xu, Yuchun, Thomson, Gareth A., Kolokas, Nikolaos, Maisuradze, Alexander, Peschl, Michael and Tzovaras, Dimitrios (2023). Towards sustainable manufacturing by enabling optimum selection of life extension strategy for industrial equipment based on cost modelling. Journal of Remanufacturing, 13 (3), pp. 263-282.

Asfahan, Hafiz M., Sultan, Muhammad, Farooq, Muhammad, Riaz, Fahid, Ibrahim, Sobhy M., Ahamed, Md Shamim and Imran, Muhammad (2023). Performance Evaluation of Phenol-Resin-Based Adsorbents for Heat Transformation Applications. Materials, 16 (15),

Ashraf, Hadeed, Qamar, Saliha, Riaz, Nadia, Shamshiri, Redmond R., Sultan, Muhammad, Khalid, Bareerah, Ibrahim, Sobhy M., Imran, Muhammad and Khan, Mohammed Usman (2023). Spatiotemporal Estimation of Reference Evapotranspiration for Agricultural Applications in Punjab, Pakistan. Agriculture, 13 (7),

Assi, Hisham, Cao, Rui, Castelino, Madhura, Cox, Ben, Gilbert, Fiona j., Gröhl, Janek, Gurusamy, Kurinchi, Hacker, Lina, Ivory, Aoife m., Joseph, James, Knieling, Ferdinand, Leahy, Martin j., Lilaj, Ledia, Manohar, Srirang, Meglinski, Igor, Moran, Carmel, Murray, Andrea, Oraevsky, Alexander a., Pagel, Mark d., Pramanik, Manojit, Raymond, Jason, Singh, Mithun kuniyil ajith, Vogt, William c., Wang, Lihong, Yang, Shufan, Members of ipasc and Bohndiek, Sarah e. (2023). A review of a strategic roadmapping exercise to advance clinical translation of photoacoustic imaging: From current barriers to future adoption. Photoacoustics, 32 , p. 100539.

Avsievich, Tatiana, Zhu, Ruixue, Popov, Alexey P., Yatskovskiy, Alexander, Popov, Anton A., Tikhonowsky, Gleb, Pastukhov, Andrei I., Klimentov, Sergei, Bykov, Alexander, Kabashin, Andrei and Meglinski, Igor (2023). Impact of Plasmonic Nanoparticles on Poikilocytosis and Microrheological Properties of Erythrocytes. Pharmaceutics, 15 (4),

Azam, Umair, Farooq, Muhammad, Munir, Muhammad Adeel, Riaz, Fahid, Sultan, Muhammad, Rehman, Ateekh Ur and Imran, Muhammad (2023). Modelling Framework for Reducing Energy Loads to Achieve Net-Zero Energy Building in Semi-Arid Climate: A Case Study. Buildings, 13 (11),

Banda, Handsome, Rezk, Ahmed, Elsayed, Eman and Askalany, Ahmed (2023). Experimental and computational study on utilising graphene oxide for adsorption cooling and water desalination. Applied Thermal Engineering, 229 ,

Biswas, Mohammad and Wilberforce, Tabbi (2023). Dynamic thermal model development of direct methanol fuel cell. International Journal of Thermofluids, 17 ,

Buck, Lyndon, Sawant, Bhairavi, Abeledo-Lameiro, Maria Jesus, García-Gil, Ángela, Gómez-Couso, Hipolito H., Marasini, Ramesh, Inmaculada Polo-López, M., Marugán, Javier, Gómez-Couso, Hipolito H., Lakshmi, K Vijaya and McGuigan, Kevin G. (2023). Good optical transparency is not an essential requirement for effective solar water disinfection (SODIS) containers. Journal of Environmental Chemical engineering, 11 (3),

Bulygin, Andrey, Meglinski, Igor and Kistenev, Yury (2023). Non-Paraxial Effects in the Laser Beams Sharply Focused to Skin Revealed by Unidirectional Helmholtz Equation Approximation. Photonics, 10 (8),

Chen, Chong, Liu, Chao, Wang, Tao, Zhang, Ao, Wu, Wenhao and Cheng, Lianglun (2023). Compound fault diagnosis for industrial robots based on dual-transformer networks. Journal of Manufacturing Systems, 66 , pp. 163-178.

Chen, Chong, Wang, Tao, Liu, Chao, Liu, Yuxin and Cheng, Lianglun (2023). Lightweight Convolutional Transformers Enhanced Meta Learning for Compound Fault Diagnosis of Industrial Robot. IEEE Transactions on Instrumentation and Measurement, 72 ,

Chidambaram, Arun Raj, Krishnasamy, Anand, Duraisamy, Ganesh and Hossain, A K (2023). Investigations on Reactivity Controlled Compression Ignition Combustion with Different Injection Strategies using Alternative Fuels Produced from Waste Resources. International Journal of Engine Research, 24 (9), 4063 - 4076.

Elbessomy, Mohamed O., Elsheniti, Mahmoud B., Elsherbiny, Samy M., Rezk, Ahmed and Elsamni, Osama A. (2023). Productivity and Thermal Performance Enhancements of Hollow Fiber Water Gap Membrane Distillation Modules Using Helical Fiber Configuration: 3D Computational Fluid Dynamics Modeling. Membranes, 13 (10),

Farooq, Muhammad, Rehman, Ateekh Ur, Anwer, Izza, Imran, Muhammad, Pettinau, Alberto and Andresen, John M. (2023). Towards net-zero: CO 2 capture and biogas purification through electric potential swing desorption to achieve SDGs 7 and 13. Frontiers in Energy Research, 11 ,

Fotiadi, Andrei, Rafailov, Edik, Korobko, Dmitry, Mégret, Patrice, Bykov, Alexander and Meglinski, Igor (2023). Brillouin Interaction between Two Optical Modes Selectively Excited in Weakly Guiding Multimode Optical Fibers. Sensors, 23 (3),

Ghungrad, Suyog, Mohammed, Abdullah and Haghighi, Azadeh (2023). Energy-efficient and quality-aware part placement in robotic additive manufacturing. Journal of Manufacturing Systems, 68 , pp. 644-650.

Han, Zhiqiang, Jang, Jeawon, Souppez, Jean-Baptiste R. G., Seo, Hyoung-Seock and Oh, Daekyun (2023). Comparison of structural design and future trends in composite hulls: A regulatory review. International Journal of Naval Architecture and Ocean Engineering, 15 ,

Hossain, Abul K., Sharma, Vikas, Ahmad, Gulzar and Awotwe, Tabbi (2023). Energy outputs and emissions of biodiesels as a function of coolant temperature and composition. Renewable Energy, 215 ,

Hu, Youxi, Liu, Chao, Zhang, Ming, Jia, Yu and Xu, Yuchun (2023). A Novel Simulated Annealing-Based Hyper-Heuristic Algorithm for Stochastic Parallel Disassembly Line Balancing in Smart Remanufacturing. Sensors, 23 (3),

Huang, Ziqi, Fey, Marcel, Liu, Chao, Beysel, Ege, Xu, Xun and Brecher, Christian (2023). Hybrid learning-based digital twin for manufacturing process: Modeling framework and implementation. Robotics and Computer-Integrated Manufacturing, 82 ,

Jacob, Deborah, Guerrini, Lorena, Pescaglia, Federica, Pierucci, Simona, Gelormini, Carmine, Minutolo, Vincenzo, Fratini, Antonio, Di Lorenzo, Giorgio, Petersen, Hannes and Gargiulo, Paolo (2023). Adaptation strategies and neurophysiological response in early-stage Parkinson's disease: BioVRSea approach. Frontiers in Human Neuroscience, 17 ,

Jamil, Muhammad Ahmad, Shahzad, Muhammad Wakil, Xu, Ben Bin, Imran, Muhammad, Ng, Kim Choon, Zubair, Syed M., Markides, Christos N. and Worek, William M. (2023). Energy-efficient indirect evaporative cooler design framework: An experimental and numerical study. Energy Conversion and Management, 292 ,

KEUNG, K.L., LEE, C.K.M., XIA, Liqiao, LIU, Chao, LIU, Bufan and JI, P. (2023). A cyber-physical robotic mobile fulfillment system in smart manufacturing: The simulation aspect. Robotics and Computer-Integrated Manufacturing, 83 ,

Ke, Xiaolong, Yu, Yongheng, Li, Kangsen, Wang, Tianyi, Zhong, Bo, Wang, Zhenzhong, Kong, Lingbao, Guo, Jiang, Huang, Lei, Idir, Mourad, Liu, Chao and Wang, Chunjin (2023). Review on robot-assisted polishing:Status and future trends. Robotics and Computer-Integrated Manufacturing, 80 ,

Khokhlova, Liudmila, Komaris, Dimitrios-Sokratis, Davarinos, Nikolaos, Mahalingam, Karuppiah, O'Flynn, Brendan and Tedesco, Salvatore (2023). Non-invasive Assessment of Cartilage Damage of the Human Knee using Acoustic Emission Monitoring: a Pilot Cadaver Study. IEEE Transactions on Biomedical Engineering, 70 (9), pp. 2741-2751.

Li, An, Goto, Keiju, Kobayashi, Yuusuke, Hara, Yushin, Jia, Yu, Shi, Yu, Soutis, Constantinos, Kurita, Hiroki, Narita, Fumio, Otsuka, Keisuke and Makihara, Kanjuro (2023). Energy harvesting using a magnetostrictive transducer based on switching control. Sensors and Actuators A: Physical, 355 ,

Liang, Xiaoxia, Zhang, Ming, Feng, Guojin, Wang, Duo, Xu, Yuchun and Gu, Fengshou (2023). Few-Shot Learning Approaches for Fault Diagnosis Using Vibration Data: A Comprehensive Review. Sustainability, 15 (20),

Liang, Xiaoxia, Zhang, Ming, Feng, Guojin, Xu, Yuchun, Zhen, Dong and Gu, Fengshou (2023). A Novel Deep Model with Meta-learning for Rolling Bearing Few-shot Fault Diagnosis. Journal of Dynamics, Monitoring and Diagnostics, 2 (2), 102–114.

Lv, Chunpu, Huang, Jingwei, Zhang, Ming, Wang, Huangang and Zhang, Tao (2023). Semi-Supervised Deep Kernel Active Learning for Material Removal Rate Prediction in Chemical Mechanical Planarization. Sensors, 23 (9),

Maghrabie, Hussein M., Olabi, Abdul Ghani, Rezk, Ahmed, Radwan, Ali, Alami, Abdul Hai and Abdelkareem, Mohammad Ali (2023). Energy Storage for Water Desalination Systems Based on Renewable Energy Resources. Energies, 16 (7),

Marshall, Ruby, Souppez, Jean-Baptiste R. G., Khan, Mariya, Viola, Ignazio Maria, Nabae, Hiroyuki, Suzumori, Koichi, Stokes, Adam and Giorgio-Serchi, Francesco (2023). Mechanical Characterisation of Woven Pneumatic Active Textile. IEEE Robotics and Automation Letters, 8 (5), pp. 2804-2811.

Masera, Kemal and Hossain, Abul Kalam (2023). Advancement of biodiesel fuel quality and NOx emission control techniques. Renewable and sustainable energy reviews, 178 ,

Meglinski, Igor, Shi, Lingyan and Ma, Hui (2023). Introduction to the special issue on polarization of light in biomedical applications. Journal of Innovative Optical Health Sciences, 16 (5),

Minino, Roberta, Romano, Antonella, Troisi Lopez, Emahnuel, Liparoti, Marianna, Sorrentino, Pierpaolo and Fratini, Antonio (2023). The Effects of Vibratory and Acoustic Stimulations on Postural Control in Healthy People:A Systematic Review. Annals of Biomedical Engineering, 51 (4), pp. 643-659.

Mokarram, Narges H., Yu, Zhibin and Imran, Muhammad (2023). A techno-economic survey on high- to low-temperature waste heat recovery cycles for UK glass sector. International Journal of Green Energy, 20 (12), pp. 1384-1400.

Moldosanov, Kamil, Bykov, Alexander, Kairyev, Nurlanbek, Khodzitsky, Mikhail, Kropotov, Grigory, Lelevkin, Valery, Meglinski, Igor, Postnikov, Andrei and Shakhmin, Alexey (2023). Terahertz-to-infrared converters for imaging the human skin cancer: challenges and feasibility. Journal of medical imaging (Bellingham, Wash.), 10 (2),

Nair, Sarita S, Marasini, Ramesh, Buck, Lyndon, Dhodapkar, Rita, Marugan, Javier, Lakshmi, K Vijaya and McGuigan, Kevin G (2023). Life cycle assessment comparison of point-of-use water treatment technologies: solar water disinfection (SODIS), boiling water, and chlorination. Journal of Environmental Chemical engineering, 11 (3),

Olabi, A.g., Wilberforce, Tabbi, Obaideen, Khaled, Sayed, Enas Taha, Shehata, Nabila, Alami, Abdul Hai and Abdelkareem, Mohammad Ali (2023). Micromobility: Progress, benefits, challenges, policy and regulations, energy sources and storage, and its role in achieving sustainable development goals. International Journal of Thermofluids, 17 ,

Olabi, Abdul Ghani, Rezk, Hegazy, Abdelkareem, Mohammad Ali, Awotwe, Tabbi, Maghrabie, Hussein M., Selim, Fatahallah Freig, Rahman, Shek Mohammod Atiqure, Shah, Sheikh Khaleduzzaman and Zaky, Alaa A. (2023). Optimal Parameter Identification of Perovskite Solar Cells Using Modified Bald Eagle Search Optimization Algorithm. Energies, 16 (1),

Olabi, Abdul Ghani, Rezk, Hegazy, Sayed, Enas Taha, Awotwe, Tabbi, Alshathri, Samah Ibrahim and Abdelkareem, Mohammad Ali (2023). Optimal Parameter Identification of Single-Sensor Fractional Maximum Power Point Tracker for Thermoelectric Generator. Sustainability, 15 (6),

Onwudili, Jude A., Sharma, Vikas, Scaldaferri, Cristiane A. and Hossain, Abul K. (2023). Production of upgraded fuel blend from fast pyrolysis bio-oil and organic solvent using a novel three-stage catalytic process and its combustion characteristics in a diesel engine. Fuel, 335 ,

Oyinlola, Muyiwa, Okoya, Silifat Abimbola, Whitehead, Timothy, Evans, Mark and Lowe, Anne Sera (2023). The potential of converting plastic waste to 3D printed products in Sub-Saharan Africa. Resources, Conservation and Recycling Advances, 17 ,

Radwan, Ali, Mahmoud, Montaser, Olabi, Abdul-Ghani, Rezk, Ahmed, Maghrabie, Hussein M. and Abdelkareem, Mohammad Ali (2023). Thermal comparison of mono-facial and bi-facial photovoltaic cells considering the effect of TPT layer absorptivity. International Journal of Thermofluids, 18 ,

Rezk, Ahmed, Olabi, Abdul G., Alami, Abdul H., Radwan, Ali, Demir, Hasan, Rahman, Shek M., Shah, Sheikh K. and Abdelkareem, Mohammad A. (2023). Experimental Study on Utilizing Silica Gel with Ethanol and Water for Adsorption Heat Storage. Energies, 16 (1),

Rezk, Hegazy, Olabi, A. G., Sayed, Enas Taha and Wilberforce, Tabbi (2023). Role of Metaheuristics in Optimizing Microgrids Operating and Management Issues::A Comprehensive Review. Sustainability, 15 (6),

Rezk, Hegazy, Olabi, A. G., Wilberforce, Tabbi and Sayed, Enas Taha (2023). A Comprehensive Review and Application of Metaheuristics in Solving the Optimal Parameter Identification Problems. Sustainability, 15 (7),

Rezk, Mohamed, Elsheniti, Mahmoud B., Rezk, Ahmed and Elsamni, Osama A. (2023). Multi-objective optimisation of MOF-801 adsorbent packed into copper foamed bed for cooling and water desalination systems. Applied Thermal Engineering, 229 , p. 1.

Rigoni, Isotta, Degano, Giulio, Hassan, Mahmoud and Fratini, Antonio (2023). Sensorimotor recalibration of postural control strategies occurs after whole body vibration. Scientific Reports, 13 (1),

Sayed, Enas Taha, Olabi, Abdul Ghani, Alami, Abdul Hai, Radwan, Ali, Mdallal, Ayman, Rezk, Ahmed and Abdelkareem, Mohammad Ali (2023). Renewable Energy and Energy Storage Systems. Energies, 16 (3),

Sdobnov, Anton, Piavchenko, Gennadii A., Bykov, Alexander V. and Meglinski, Igor (2023). Advances in Dynamic Light Scattering Imaging of Blood Flow. Laser and Photonics Reviews ,

Sdobnov, Anton, Ushenko, Volodymir a., Trifonyuk, Liliya, Bakun, Oksana, Garazdyuk, Marta, Soltys, Irina v., Dubolazov, Olexander, Ushenko, Olexander g., Ushenko, Yuriy a., Bykov, Alexander and Meglinski, Igor (2023). Mueller-matrix imaging polarimetry elevated by wavelet decomposition and polarization-singular processing for analysis of specific cancerous tissue pathology. Journal of Biomedical Optics, 28 (10),

Sharma, Vikas, Hossain, Abul Kalam, Duraisamy, Ganesh and Griffiths, Gareth (2023). Microalgal Biodiesel: A Challenging Route toward a Sustainable Aviation Fuel. Fermentation, 9 (10),

Sharma, Vikas, Hossain, Abul Kalam, Duraisamy, Ganesh and Jacob Thomas, Justine (2023). Sustainable biodiesel from flex-mix feedstock and its combustion in a VCR-CRDI engine with variable exhaust gas recirculation and injection pressure. Journal of Physics: Energy, 5 (1),

Sohrabi, Arvin, Asgari, Nima, Imran, Muhammad and Shahzad, Muhammad Wakil (2023). Comparative energy, exergy, economic, and environmental (4E) analysis and optimization of two high-temperature Kalina cycles integrated with thermoelectric generators for waste heat recovery from a diesel engine. Energy Conversion and Management, 291 ,

Souppez, Jean-Baptiste R. G. (2023). Engineering Employability Skills: Students, Academics and Industry Professionals Perception. International Journal of Mechanical Engineering Education ,

Souppez, Jean-Baptiste R. G. and Pavar, Geethanjali (2023). Recycled Carbon Fibre Composites in Automotive Manufacturing. International Journal of Automotive Manufacturing and Materials, 2 (1),

Swadener, John G. (2023). Strain Engineering of ZrO 2 @TiO 2 Core@shell Nanoparticle Photocatalysts. Solar, 3 (1), pp. 15-24.

Tang, Xiaoli, Shi, Yu, Chen, Boyue, Longden, Mark, Farooq, Rabiya, Lees, Harry and Jia, Yu (2023). A miniature and intelligent Low-Power in situ wireless monitoring system for automotive wheel alignment. Measurement: Journal of the International Measurement Confederation, 211 ,

Ukoba, M O, Diemuodeke, E O, Briggs, T A, Imran, M, Ojapah, M M, Owebor, K, Nwachukwu, C, Aminu, M D, Okedu, K E, Kalam, A and Colak, I (2023). Optimal sites for agricultural and forest residues energy conversion plant using geographic information system. Heliyon, 9 (9), e19660.

Venediktov, Artem A., Bushueva, Olga Yu, Kudryavtseva, Varvara A., Kuzmin, Egor A., Moiseeva, Aleksandra V., Baldycheva, Anna, Meglinski, Igor and Piavchenko, Gennadii A. (2023). Closest horizons of Hsp70 engagement to manage neurodegeneration. Frontiers in Molecular Neuroscience, 16 ,

Votintsev, Alexey P., Borisov, Alexey V., Kochnev, Zakhar S., Meglinski, Igor and Kistenev, Yury V. (2023). A Terahertz Radiation Linear Polarizer Based on Using a Magnetic Fluid in an External Magnetic Field. Photonics, 10 (6), p. 675.

Wang, Chuting, Guo, Ruifeng, Yu, Haoyu, Liu, Chao and Deng, Changyi (2023). Task offloading in cloud-edge collaboration-based cyber physical machine tool. Robotics and Computer-Integrated Manufacturing, 79 ,

Wilberforce, Tabbi and Alaswad, Abed (2023). Performance analysis of a vertical axis wind turbine using computational fluid dynamics. Energy, 263 (Part E),

Wilberforce, Tabbi and Muhammad, Imran (2023). Dynamic modelling and analysis of Organic Rankine Cycle power units for the recovery of waste heat from 110kW Proton Exchange Membrane Fuel cell system. International Journal of Thermofluids, 17 ,

Xu, Yuandong, Feng, Guojin, Tang, Xiaoli, Yang, Shixi, Gu, Fengshou and Ball, Andrew D. (2023). A Modulation Signal Bispectrum Enhanced Squared Envelope for the Detection and Diagnosis of Compound Epicyclic Gear Faults. Structural Health Monitoring, 22 (1), pp. 562-580.

Yan, Jihong, Zhang, Mingyang and Xu, Yuchun (2023). Multi-Objective Considered Process Parameter Optimization of Welding Robots Based on Small Sample Size Dataset. Sustainability, 15 (20),

Yan, Shen, Zhong, Xiang, Shao, Haidong, Ming, Yuhang, Liu, Chao and Liu, Bin (2023). Digital twin-assisted imbalanced fault diagnosis framework using subdomain adaptive mechanism and margin-aware regularization. Reliability Engineering and System Safety, 239 ,

Yu, Yaonan, Shi, Yu, Kurita, Hiroki, Jia, Yu, Wang, Zhenjin and Narita, Fumio (2023). Carbon Fiber-Reinforced Piezoelectric Nanocomposites:Design, Fabrication and Evaluation for Damage Detection and Energy Harvesting. Composites Part A: Applied Science and Manufacturing, 172 , pp. 1-15.

Zahid, Imran, Farhan, M., Farooq, M., Asim, M. and Imran, M. (2023). Experimental investigation for thermal performance enhancement of various heat sinks using Al2O3 NePCM for cooling of electronic devices. Case Studies in Thermal Engineering, 41 ,

Zandi, Marie, Benton, David and Sugden, Kate (2023). Laser beam wavelength determination algorithm using a digital micromirror device. Optical Engineering, 62 (6),

Zhan, Tianzhuo, Xu, Mao, Cao, Zhi, Zheng, Chong, Kurita, Hiroki, Narita, Fumio, Wu, Yen-Ju, Xu, Yibin, Wang, Haidong, Song, Mengjie, Wang, Wei, Zhou, Yanguang, Liu, Xuqing, Shi, Yu, Jia, Yu, Guan, Sujun, Hanajiri, Tatsuro, Maekawa, Toru, Okino, Akitoshi and Watanabe, Takanobu (2023). Effects of Thermal Boundary Resistance on Thermal Management of Gallium-Nitride-Based Semiconductor Devices: A Review. Micromachines, 14 (11),

Zhang, Ming, Sharma, Vikas, Jia, Yu, Hossain, A K and Xu, Yuchun (2023). Data-driven Approach for Condition Assessment of a Diesel Engine Powered with Various Biodiesels. SAE Technical Papers, 2023-0 ,

Zhang, Ming, Sharma, Vikas, Wang, Zezhong, Jia, Yu, Hossain, Abul Kalam and Xu, Yuchun (2023). Online Big-Data Monitoring and Assessment Framework for Internal Combustion Engine with Various Biofuels. International Journal of Automotive Manufacturing and Materials, 2 (2),

Zhigalov, Alexander and Jensen, Ole (2023). Perceptual echoes as travelling waves may arise from two discrete neuronal sources. NeuroImage, 272 ,

Zidane, Iham F, Ali, Hesham, Swadener, Greg, Eldrainy, Yehia and Shehata, Ali (2023). Effect of Upstream Deflector Utilization on H-Darrieus Wind Turbine Performance: An Optimization Study. Alexandria Engineering Journal, 63 , pp. 175-189.

Book Section

Boyd, Liam, Lu, Yang and Souppez, Jean-Baptiste R. G. (2023). Pedagogy 4.0: Employability Skills and Computer Aided Design (CAD) Education for Industry 4.0. IN: The 28th International Conference on Automation and Computing (ICAC2023). GBR: UNSPECIFIED.

Hitt, S. J., Fowler, Stella, Junaid, S. and Rich, Johnny (2023). PRACTICAL TOOLKIT FOR EMBEDDING ETHICS IN THE ENGINEERING CURRICULUM. IN: SEFI 2023 - 51st Annual Conference of the European Society for Engineering Education. Reilly, Ger; Murphy, Mike; Nagy, Balazs Vince and Jarvinen, Hannu-Matti (eds) SEFI 2023 - 51st Annual Conference of the European Society for Engineering Education: Engineering Education for Sustainability, Proceedings . IRL: European Society for Engineering Education (SEFI).

Oyinlola, Muyiwa, Okoya, Silifat abimbola and Whitehead, Timothy (2023). Utilising plastic waste to create 3D-printed products in sub-Saharan Africa. IN: Digital Innovations for a Circular Plastic Economy in Africa. Oyinlola, Muyiwa and Kolade, Oluwaseun (eds) Routledge.

O’Sullivan, Patricia, Menolotto, Matteo, O’Flynn, Brendan and Komaris, Dimitrios-Sokratis (2023). Validation of Endurance Model for Manual Tasks*. IN: 2023 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference, 2023 . IEEE.

Shaikh, M., Alaswad, A. and Junaid, Sarah (2023). The Immersive Placement Experience: Sink Or Swim? IN: SEFI 2023 - 51st Annual Conference of the European Society for Engineering Education. Reilly, Ger; Murphy, Mike; Nagy, Balazs Vince and Jarvinen, Hannu-Matti (eds) IRL: European Society for Engineering Education (SEFI).

Sodre, Jose Ricardo and Omran, Abdelnasir (2023). Exergoeconomic Model of a PEM Fuel Cell. IN: 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2023). ESP: Curran Associates Inc. Proceedings.

Souppez, Jean-Baptiste R. G. (2023). A Novel Experimental Approach to the Aerodynamic Testing of Wind Assisted Ship and Yacht Sails. IN: International Conference on Postgraduate Research in Maritime Technology 2023. Hellenic Institute of Marine Technology.

Souppez, Jean-Baptiste R. G. (2023). Structural Design of Wooden Boats. IN: Proceedings of Historic Ships Conference 2023. GBR: Royal Institution of Naval Architects. (In Press)

Souppez, Jean-Baptiste R. G., Goswami, Debjani and Yuen, Joe (2023). Assessment and Feedback in the Generative AI Era: Transformative Opportunities, Novel Assessment Strategies and Policies in Higher Education. IN: IFNTF Symposathon, Augmenting Teaching Excellence: Embracing the future of Education with AI and Emerging Technologies. International Federation of National Teaching Fellows.

Thomson, Gareth A. and Prince, Mark (2023). A Look at Vocational and Academic Student Backgrounds In Ability to Solve Practical Problems. IN: SEFI 2023 Conference Proceedings. Reilly, Ger; Murphy, Mike; Nagy, Balazs Vince and Jarvinen, Hannu-Matti (eds) SEFI 2023 - 51st Annual Conference of the European Society for Engineering Education: Engineering Education for Sustainability, Proceedings . IRL: European Society for Engineering Education (SEFI).

Thomson, Gareth and Kovesi, Klara (2023). Student Reflective Practice as Part of Engineering Programmes. IN: Proceedings of the 19th International CDIO (Conceive Design Implement Operate) Conference. Lyng, Reidar; Bennedsen, Jens; Bettaieb, Lamjed; Bodsberg, Nils Rune; Edstrom, Kristina; Guojonsdottir, Maria Sigriour; Roslof, Janne; Solbjorg, Ole K. and Oien, Geir (eds) Proceedings of the International CDIO Conference . NOR: NTNU - SEED (Norwegian University for Science & Technology - Center for Science & Engineering Education Development).

Thomson, Gareth and Kövesi, Klara (2023). Reflective Practice in STEM Degrees to Support Adaptability and Lifelong Learning. IN: Book of Proceedings for the 51st Annual Conference of the European Society for Engineering Education. Reilly, Ger; Murphy, Mike; Nagy, Balazs Vince and Jarvinen, Hannu-Matti (eds) Proceedings of the SEFI Annual Conference . IRL: European Society for Engineering Education (SEFI).

Vraitch, Rajan, Prince, Mark and Souppez, Jean-Baptiste R. G. (2023). Infill Density in Additive Manufacturing and Application to the DFMA of an Iron Man Helmet. IN: The 28th International Conference on Automation and Computing (ICAC2023). GBR: UNSPECIFIED.

Wan, Jian and McLoone, Seán (2023). Remaining Useful Life Estimation of Lenses for an Ion Beam Etching Tool in Semiconductor Manufacturing Using Deep Convolutional Neural Networks. IN: Electronics, Communications and Networks. Tallón-Ballesteros, Antonio J.; Cortés-Ancos, Estefanía and López-García, Diego A. (eds) Frontiers in Artificial Intelligence and Applications, 381 . CHN: IOS.