Browse by Aston Author
Up a level |
Article
Alam, Marzia, Imran, Muhammad, Sultan, Muhammad, Manzoor, Umar, Khan, Zafar A., Rezk, Ahmed and Alaswad, Abed (2024). System-level optimisation of hybrid energy powered irrigation system. Renewable Energy, 234 ,
Banda, Handsome and Rezk, Ahmed (2024). Enhancing Heat and Mass Transfer in Adsorption Cooling and Desalination Systems Using Ionic Liquid and Graphene Consolidated Composites. Energies, 17 (19),
Rezk, Ahmed, Visak, Zoran, Rupam, Tahmid Hasan, Hammerton, James, Yuan, Qingchun, Derry, Matthew J. and Saha, Bidyut Baran (2024). Material-level experimental study on utilising ionic liquid/graphene composites for sorption heat storage. Thermal Science and Engineering Progress, 55 ,
Banda, Handsome, Rupam, Tahmid Hasan, Rezk, Ahmed, Visak, Zoran, Hammerton, James, Yuan, Qingchun and Saha, Bidyut Baran (2024). Preparation and assessment of ionic liquid and few-layered graphene composites to enhance heat and mass transfer in adsorption cooling and desalination systems. International Journal of Heat and Mass Transfer, 221 ,
Elbessomy, Mohamed O., Elsheniti, Mahmoud B., Elsherbiny, Samy M., Rezk, Ahmed and Elsamni, Osama A. (2023). Productivity and Thermal Performance Enhancements of Hollow Fiber Water Gap Membrane Distillation Modules Using Helical Fiber Configuration: 3D Computational Fluid Dynamics Modeling. Membranes, 13 (10),
Albahkali, Thamer, Fouly, Ahmed, Alnaser, Ibrahim A., Elsheniti, Mahmoud B., Rezk, Ahmed and Abdo, Hany S. (2023). Investigation of the Mechanical and Tribological Behavior of Epoxy-Based Hybrid Composite. Polymers, 15 (19),
Banda, Handsome, Rezk, Ahmed, Elsayed, Eman and Askalany, Ahmed (2023). Experimental and computational study on utilising graphene oxide for adsorption cooling and water desalination. Applied Thermal Engineering, 229 ,
Rezk, Mohamed, Elsheniti, Mahmoud B., Rezk, Ahmed and Elsamni, Osama A. (2023). Multi-objective optimisation of MOF-801 adsorbent packed into copper foamed bed for cooling and water desalination systems. Applied Thermal Engineering, 229 , p. 1.
Al-alami, Abdul Hai, Olabi, Abdul Ghani, Mdallal, Ayman, Rezk, Ahmed, Radwan, Ali and Abdelkareem, Mohammad Ali (2023). Concentrating solar power (CSP) technologies: Status and analysis. International Journal of Thermofluids, 18 , p. 100340.
Radwan, Ali, Mahmoud, Montaser, Olabi, Abdul-Ghani, Rezk, Ahmed, Maghrabie, Hussein M. and Abdelkareem, Mohammad Ali (2023). Thermal comparison of mono-facial and bi-facial photovoltaic cells considering the effect of TPT layer absorptivity. International Journal of Thermofluids, 18 ,
Maghrabie, Hussein M., Olabi, Abdul Ghani, Rezk, Ahmed, Radwan, Ali, Alami, Abdul Hai and Abdelkareem, Mohammad Ali (2023). Energy Storage for Water Desalination Systems Based on Renewable Energy Resources. Energies, 16 (7),
Sayed, Enas Taha, Olabi, Abdul Ghani, Alami, Abdul Hai, Radwan, Ali, Mdallal, Ayman, Rezk, Ahmed and Abdelkareem, Mohammad Ali (2023). Renewable Energy and Energy Storage Systems. Energies, 16 (3),
Abdelhady, Ramy, Radwan, Ali, Rezk, Ahmed, Olabi, A.G., Sharma, Vikas, Hossain, A K, Alaswad, Abed and Abdelkareem, Mohammad Ali (2023). Energy and exergy study of the integrated adsorption-absorption system driven by transient heat sources for cooling and desalination. Energy Conversion and Management, 277 ,
Rezk, Ahmed, Olabi, Abdul G., Alami, Abdul H., Radwan, Ali, Demir, Hasan, Rahman, Shek M., Shah, Sheikh K. and Abdelkareem, Mohammad A. (2023). Experimental Study on Utilizing Silica Gel with Ethanol and Water for Adsorption Heat Storage. Energies, 16 (1),
Sharma, Vikas, Hossain, A K, Ahmed, Alamgir and Rezk, Ahmed (2022). Study on using graphene and graphite nanoparticles as fuel additives in waste cooking oil biodiesel. Fuel, 328 ,
Alammar, Ahmed, Rezk, Ahmed, Alaswad, Abed, Fernando, Julia, Decker, Stephanie D, Olabi, Abdul Ghani, Ruhumuliza, Joseph and Gasana, Quenan (2022). The Technical, Economic, and Environmental Feasibility of a Bioheat-Driven Adsorption Cooling System for Food Cold Storing:A Case Study of Rwanda. Energy, 258 ,
Rezk, Ahmed, Ilis, Gamze Gediz and Demir, Hasan (2022). Experimental Study on Silica gel / Ethanol Adsorption characteristics for Low-Grade Thermal Driven Adsorption Refrigeration Systems. Thermal Science and Engineering Progress, 34 ,
Shaaban, Mohamed, Elsheniti, Mahmoud, Rezk, Ahmed, Elhelw, Mohamed and Elsamni, Osama (2022). Performance investigation of adsorption cooling and desalination systems employing thermally enhanced copper foamed bed coated with SAPO-34 and CPO-27(Ni). Applied Thermal Engineering, 205 ,
Rezk, Ahmed, Sharma, Sidharth, Barrans, Simon, hossain, A K and Imran, Muhammad (2021). Computational study of a radial flow turbine operates under various pulsating flow shapes and amplitudes. Journal of Energy Resources Technology, 143 (12),
Engineer, Yohan, Rezk, Ahmed and Hossain, A K (2021). Energy analysis and optimization of a small-scale axial flow turbine for Organic Rankine Cycle application. International Journal of Thermofluids, 12 ,
Abdelhady, Ramy, Rezk, Ahmed, Salah, Ehab, Askalany, Ahmed, Zohir, A., Sultan, Muhammad, Ghazi, Mohammad, Abdelkareem, Mohammad and Olabi, Abdul Ghani (2021). Metal-organic frameworks in cooling and water desalination: Synthesis and application. Renewable and sustainable energy reviews, 149 ,
Elsheniti, Mahmoud, Rezk, Ahmed, Shaaban, Mohamed, Roshdy, Mohamed, Nagib, Yahia, Elsamni, Osama and Saha, Bidyut B (2021). Performance of a solar adsorption cooling and desalination system using aluminum fumarate and silica gel. Applied Thermal Engineering, 194 ,
Alammar, A A, Rezk, A, Alaswad, A, Ruhumuliza, J and Gasana, Q G (2021). Solar cooling modelling utilising for cooling agro-products cold store under Rwandan environmental conditions. IOP Conference Series: Materials Science and Engineering, 1067 (1),
Lee, Sam, Rezk, Ahmed, Jupp, Mrtin and Nickson, Keith (2018). The Influence of Pulse Shape on the Performance of a Mixed Flow Turbine for Turbocharger Applications. International Journal of Mechanical Engineering and Robotics Research, 7 (2), pp. 136-142.
Elsayed, Ahmed, Al-dadah, Raya, Mahmoud, Saad and Rezk, Ahmed (2014). Numerical investigation of turbulent flow heat transfer and pressure drop of AL2O3/water nanofluid in helically coiled tubes. International Journal of Low-Carbon Technologies, 10 (3), 275–282.
Rezk, A., Al-Dadah, R. K., Mahmoud, S. and Elsayed, A. (2013). Effects of contact resistance and metal additives in finned-tube adsorbent beds on the performance of silica gel/water adsorption chiller. Applied Thermal Engineering, 53 (2), pp. 278-284.
Rezk, Ahmed, Al-Dadah, Raya, Mahmoud, Saad and Elsayed, Ahmed (2012). Characterisation of metal organic frameworks for adsorption cooling. International Journal of Heat and Mass Transfer, 55 (25-26), pp. 7366-7374.
Al-Dadah, R. K., Jackson, G. and Rezk, Ahmed (2011). Solar powered vapor absorption system using propane and alkylated benzene AB300 oil. Applied Thermal Engineering, 31 (11-12), pp. 1936-1942.
Conference or Workshop Item
Rezk, Mohamed, Elsheniti, Mahmoud, Rezk, Ahmed and Elsamni, Osama A. (2021). Numerical Investigation of Copper Foam Adsorption Beds Packed with MOF-801 for Space Cooling and Desalination Applications. IN: 13th International Conference on Applied Energy, ICAE 2021. 2021-11-29 - 2021-12-02.