Items where Division is "College of Engineering & Physical Sciences" and Year is 1973

B

Ballard, Terence D. (1973). Steady state thermal performance of a high temperature reactor fuel element. PHD thesis, Aston University.

Bowden, Alan L. (1973). A study of magnetic non-linearity and finite length effects in solid iron subjected to a travelling MMF wave. PHD thesis, Aston University.

Bray, K.H.M. (1973). Computer analysis of large civil engineering structures. PHD thesis, Aston University.

C

Chard, Robert Alan (1973). The development of a computer based data acquisition and processing system. Masters thesis, Aston University.

Coy, Richard C. (1973). Physical Analysis of Worn Surfaces Formed Under Extreme Pressure Lubrication Conditions. PHD thesis, Aston University.

D

Deeble, R.H. (1973). Non-linear analysis of reinforced concrete frames. PHD thesis, Aston University.

E

Eastham, Leonard (1973). Computer aided design-information retrieval system in a conventional mode for the selection of building components. PHD thesis, Aston University.

F

Fisher, John (1973). The Electrical and Mechanical Properties of Electrographite-Metal Interfaces. PHD thesis, Aston University.

H

Harley, M.J. (1973). Computer Aided Design and Operation of Reservoirs. PHD thesis, Aston University.

Hilleard, Ronald J. (1973). An X-ray diffraction study of chromite spinels. PHD thesis, Aston University.

Howard, G.F. (1973). A Study of the Correspondence Rule in a Viscoelastic Stress Analysis. Masters thesis, Aston University.

M

Martin, L.H. (1973). A theoretical investigation into the ultimate strength in bending and torsion of plain and reinforced concrete members. PHD thesis, Aston University.

Maybury, Alan (1973). An Investigation of the Failure Mechanisms of a Carbon Fibre Reinforced Composite Material in Bending. PHD thesis, Aston University.

P

Phillips, R.H. (1973). High Temperature Cracking in the Weld Heat Affected Zone of High Strength Ferritic Steels. PHD thesis, Aston University.

S

Salter, Ian W. (1973). An Investigation into some Properties of Thin and Ultra Thin Niobium Films. PHD thesis, Aston University.

Scrimshire, David A. (1973). Theoretical Analysis of Gas Exchange in a Lung Model. PHD thesis, Aston University.

Sidhu, J.S. (1973). The application of finite element theory to curved elements. PHD thesis, Aston University.

Skedge, N.C. (1973). Houses and Their Repair - an Economic Study. Masters thesis, Aston University.

T

Thomas, C.P. (1973). Mechanical properties of heavily overconsolidated clays : laboratory investigation of the compressibility of lower lias clay. PHD thesis, Aston University.

Tripathi, Jagat N. (1973). Studies of Rectangular-Wave Modulation and Pulse-Interval Modulation Systems. PHD thesis, Aston University.

W

Walls, John M. (1973). The characterisation of clean metal surfaces. PHD thesis, Aston University.

Wong, S.C. (1973). Quality Control in Midland Industry. Masters thesis, Aston University.

Y

Yates, John (1973). Second breakdown in transistors. PHD thesis, Aston University.

Young, M.J.R. (1973). A study of the mechanics of ultrasonic deep drawing using a simulative test. PHD thesis, Aston University.

Ö

Önen, Yusuf H. (1973). Elastic-plastic analysis of complete building structures. PHD thesis, Aston University.