Browse by Aston Author
Up a level |
2000
Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fatigue crack propagation in some PM steels. Powder Metallurgy, 43 (2), pp. 149-156.
Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fracture toughness of some high density PM steels. Powder Metallurgy, 43 (1), pp. 43-48.
1996
Davis, C.L. and King, J.E. (1996). Cleavage initiation in the intercritically reheated coarse-grained heat affected zone:Part II. Failure criteria and statistical effects. Metallurgical and Materials Transactions A, 27 (10), pp. 3019-3029.
Cook, S.G.; King, J.E. and Little, J.A. (1996). Fracture toughness of SIC, Si3N4, and sialon ceramics using controlled surface flaws. Materials Science and Technology, 12 (4), pp. 366-370.
Totemeier, T.C.; Gale, W.F. and King, J.E. (1996). Isothermal fatigue of an aluminide-coated single-crystal superalloy:Part II. Effects of brittle precracking. Metallurgical and Materials Transactions A, 27 (2), pp. 363-369.
1995
Fitzpatrick, M.E.; Hutchings, M.T.; King, J.E.; Knowles, D.M. and Withers, P.J. (1995). Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiCp metal matrix composite. Metallurgical and Materials Transactions A, 26 (12), pp. 3191-3198.
Cook, S.G.; King, J.E. and Little, J.A. (1995). Surface and subsurface Vickers indentation cracks in SiC, Si3N4, and sialon ceramics. Materials Science and Technology, 11 (11), pp. 1093-1098.
Gale, W.F.; Totemeier, T.C. and King, J.E. (1995). Modification of the B2-type matrix of aluminide diffusion coatings on nickel-base superalloys-bulk aluminide analogues. Metallurgical and Materials Transactions A, 26 (4), pp. 949-956.
1994
Totemeier, T.C.; Gale, W.F. and King, J.E. (1994). Microstructural evolution of an overlay coating on a single-crystal nickel-base superalloy. Metallurgical and Materials Transactions A, 25 (12), pp. 2837-2840.
Thomas, M.P. and King, J.E. (1994). Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite. Journal of Materials Science, 29 (20), pp. 5272-5278.
Thomas, M.P. and King, J.E. (1994). Quench sensitivity of 2124 Al alloy and Al/SiCp metal matrix composite. Scripta Metallurgica et Materiala, 31 (2), pp. 209-214.
Marrow, T.J. and King, J.E. (1994). Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels. Fatigue and Fracture of Engineering Materials and Structures, 17 (7), pp. 761-771.
Marrow, T.J. and King, J.E. (1994). Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel. Materials Science and Engineering A, 183 (1-2), pp. 91-101.
Davis, C.L. and King, J.E. (1994). Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone:Part I. Fractographic evidence. Metallurgical and Materials Transactions A, 25 (3), pp. 563-573.
Boyd-Lee, A. and King, J.E. (1994). Short fatigue crack path determinants in polycrystalline Ni-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 17 (1), pp. 1-14.
1993
Totemeier, T.C.; Gale, W.F. and King, J.E. (1993). Fracture behaviour of an aluminide coating on a single crystal nickel base superalloy. Materials Science and Engineering A, 169 (1-2), pp. 19-26.
Gale, W.F. and King, J.E. (1993). Microstructural degradation of aluminide coatings on single crystal nickel based superalloys during high temperature exposure. Materials Science and Technology, 9 (9), pp. 793-798.
Knowles, D.M.; Downes, T.J. and King, J.E. (1993). Crack closure and residual stress effects in fatigue of a particle-reinforced metal matrix composite. Acta Metallurgica et Materialia, 41 (4), pp. 1189-1196.
Davis, C.L. and King, J.E. (1993). Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel. Materials Science and Technology, 9 (1), pp. 8-15.
Cotterill, P.J. and King, J.E. (1993). The influence of a coal gasifier atmosphere on fatigue crack growth rates in BS 4360 steel. International Journal of Fatigue, 15 (1), pp. 27-30.
Downes, T.J. and King, J.E. (1993). The effect of microstructure on the fracture toughness of a metal-matrix composite. Composites Part A, 24 (3), pp. 276-281.
1992
Marrow, T.J.; Cotterill, P.J. and King, J.E. (1992). Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels. Acta Metallurgica et Materialia, 40 (8), pp. 2059-2068.
Reed, P.A.S. and King, J.E. (1992). Mixed mode fatigue effects in Ni-base single crystals:preliminary results. Scripta Metallurgica et Materiala, 26 (12), pp. 1829-1834.
Grabowski, L. and King, J.E. (1992). Modelling short crack growth behaviour in nickel-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 15 (6), pp. 595-606.
1991
Knowles, D.M. and King, J.E. (1991). Influence of macroscopic residual stress fields on fatigue crack growth measurement in SiC particulate reinforced 8090 aluminium alloy. Materials Science and Technology, 7 (11), pp. 1015-1020.
Marrow, T.J.; Hippsley, C.A. and King, J.E. (1991). Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel. Acta Metallurgica et Materialia, 39 (6), pp. 1367-1376.
Knowles, D.M. and King, J.E. (1991). The influence of ageing on fatigue crack growth in SiC-particulate reinforced 8090. Acta Metallurgica et Materialia, 39 (5), pp. 793-806.
Knott, J.F. and King, J.E. (1991). Fatigue in metallic alloys containing non-metallic particles. Materials and Design, 12 (2), pp. 67-74.
1989
King, J.E. (1989). Failure in composite materials. Metals and Materials, 5 (12), pp. 720-726.
1988
Kendall, J.M. and King, J.E. (1988). Short fatigue crack growth behaviour:data analysis effects. International Journal of Fatigue, 10 (3), pp. 163-170.
1987
Bolingbroke, R.K. and King, J.E. (1987). Growth of short fatigue cracks in titanium alloys. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.
Brown, C.W. and King, J.E. (1987). Relevance of microstructural influences in the short crack regime to overall fatigue resistance. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.
1986
King, J.E. (1986). Fatigue crack propagation in nickel-base superalloys:effects of microstructure, load ratio, and temperature. Materials Science and Technology, 3 (9), pp. 750-764.
1984
Brown, C.W.; King, J.E. and Hicks, M.A. (1984). Effects of microstructure on long and short crack growth in nickel base superalloys. Metal Science, 18 (7), pp. 374-380.
1982
Hippsley, C.A.; King, J.E. and Knott, J.F. (1982). Toughness variations and intergranular fracture during the tempering of simulated HAZ structures in a Mn-Mo-Ni steel. IN: Advances in the physical metallurgy and applications of steels. London (UK): Metals Society.
King, J.E. (1982). Surface damage and near-threshold fatigue crack growth in a Ni-base superalloy in vacuum. Fatigue of Engineering Materials and Structures, 5 (2), pp. 177-188.
1981
King, J.E.; You, C.P. and Knott, J.F. (1981). Serrated yielding and the localized shear failure mode in aluminium alloys. Acta Metallurgica, 29 (9), pp. 1553-1566.
1978
King, J.E.; Smith, R.F. and Knott, J.F. (1978). ICF4 further response:further discussion of "Toughness variations of a plain carbon, martensitic steel," by B. V. N. Rao and G. Thomas. International Journal of Fracture, 14 (2), R49-R50.
King, J.E.; Smith, R.F. and Knott, J.F. (1978). Toughness variations during the tempering of a plain carbon, martensitic steel. IN: Fracture 1977. New York, NY (US): Pergamon Press.
1977
King, J.E.; Smith, R.F. and Knott, J.F. (1977). ICF4 response:discussion of "Toughness variations of a plain carbon, martensitic steel,", by B. V. N. Rao and G. Thomas. International Journal of Fracture, 13 (6), pp. 877-878.