Monitoring long distance WDM communication lines using a high-loss loopback supervisory system

Abstract

In this paper, we present experimental results for monitoring long distance WDM communication links using a line monitoring system suitable for legacy optically amplified long-haul undersea systems. This monitoring system is based on setting up a simple, passive, low cost high-loss optical loopback circuit at each repeater that provides a connection between the existing anti-directional undersea fibres, and can be used to define fault location. Fault location is achieved by transmitting a short pulse supervisory signal along with the WDM data signals where a portion of the overall signal is attenuated and returned to the transmit terminal by the loopback circuit. A special receiver is used at the terminal to extract the weakly returned supervisory signal where each supervisory signal is received at different times corresponding to different optical repeaters. Therefore, the degradation in any repeater appears on its corresponding supervisory signal level. We use a recirculating loop to simulate a 4600 km fibre link, on which a high-loss loopback supervisory system is implemented. Successful monitoring is accomplished through the production of an appropriate supervisory signal at the terminal that is detected and identified in a satisfactory time period after passing through up to 45 dB attenuation in the loopback circuit. © 2012 Elsevier B.V. All rights reserved.

Divisions: College of Engineering & Physical Sciences > Aston Institute of Photonics Technology (AIPT)
Additional Information: Copyright 2012 Elsevier B.V., All rights reserved.
Publication ISSN: 0030-4018
Last Modified: 23 Oct 2019 14:10
Date Deposited: 23 Jul 2014 14:45
Published Date: 2012-05-15
Authors: Nahas, M.M.
Blow, K.J.

Download

Item under embargo.

Export / Share Citation


Statistics

Additional statistics for this record