Items where Division is "Engineering & Applied Sciences > Chemical Engineering & Applied Chemistry" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS
Group by: Creators | Item Type | No Grouping
Number of items: 36.

Abu Bakar, Muhammad (2013). Catalytic intermediate pyrolysis of Brunei rice husk for bio-oil production. PHD thesis, Aston University.

Abu Bakar, Muhammad S. and Titiloye, James O. (2013). Catalytic pyrolysis of rice husk for bio-oil production. Journal of Analytical and Applied Pyrolysis, 103 , pp. 362-368.

Alexander, Sarah (2013). Novel biomass conversion routes:ammonia from biomass, and marine macroalgae for energy. PHD thesis, Aston University.

Behrendt, Jonathan M., Nagel, David, Chundoo, Evita, Alexander, Lois M., Dupin, Damien, Hine, Anna V., Bradley, Mark and Sutherland, Andrew J. (2013). Synthesis and characterization of dual-functionalized core-shell fluorescent microspheres for bioconjugation and cellular delivery. PLoS ONE, 8 (3),

Broadbent, Marc (2013). Surface pressure measurements of ex-vivo tear lipids:application of the Langmuir technique in lipid-aqueous interfacial studies. PHD thesis, Aston University.

Chua, Kel W., Makkawi, Yassir and Hounslow, Michael J. (2013). A priori prediction of aggregation efficiency and rate constant for fluidized bed melt granulation. Chemical Engineering Science, 98 , pp. 291-297.

Chundoo, Evita (2013). Synthesis and evaluation of nanoparticle-polymer composites. PHD thesis, Aston University.

Dimitriou, Ioanna (2013). Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels. PHD thesis, Aston University.

Fielding, Lee A., Derry, Matthew J., Ladmiral, Vincent, Rosselgong, Julien, Rodrigues, Aurélie M., Ratcliffe, Liam P. D., Sugihara, Shinji and Armes, Steven P. (2013). RAFT dispersion polymerization in non-polar solvents: facile production of block copolymer spheres, worms and vesicles in n-alkanes. Chemical Science, 4 (5), pp. 2081-2087.

Grozdanic, Nikola D., Kijevcanin, Mirjana L., Višak, Zoran P., Grozdanic, Dušan K. and Šerbanovic, Slobodan P. (2013). Correlation of liquid-liquid equilibria of non-ideal binary systems using the non-random, two-liquid model. Journal of the Serbian Chemical Society, 78 (6), pp. 865-872.

Harms, Allan (2013). Fast pyrolysis and nitrogenolysis of biomass and biogenic residues:production of a sustainable slow release fertiliser. PHD thesis, Aston University.

Hassan, Mohamed (2013). Modelling and simulation of biomass gasification in a circulating fluidized bed reactor. PHD thesis, Aston University.

Hossain, A.K., Ouadi, M., Siddiqui, S.U., Yang, Y., Brammer, J., Hornung, A., Kay, M. and Davies, Philip A. (2013). Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel. Fuel, 105 , 135–142.

Jones, Jim R., Prime, Dominic, Leaper, Mark C., Richardson, David J., Rielly, Chris D. and Stapley, Andrew G.F. (2013). Effect of processing variables and bulk composition on the surface composition of spray dried powders of a model food system. Journal of Food Engineering, 118 (1), pp. 19-30.

Kebelmann, Katharina (2013). Intermediate pyrolysis studies of aquatic biomass and potential applications in the BtVB-process. PHD thesis, Aston University.

Leaper, M.C., Leach, V., Taylor, P.M. and Prime, D.C. (2013). A comparison of compacting and caking behavior of carbonate-based washing powders. Drying Technology, 31 (7), pp. 769-774.

Mahmood, Asad S.N., Brammer, John G., Hornung, Andreas, Steele, Andrew and Poulston, Stephen (2013). The intermediate pyrolysis and catalytic steam reforming of brewers spent grain. Journal of Analytical and Applied Pyrolysis, 103 , pp. 328-342.

Mayer, Zsuzsa (2013). Pyrolysis of contaminated energy crops and the characterisation of the gained biochar. PHD thesis, Aston University.

Onwudili, J. A., Insura, N. and Williams, P. T. (2013). Autoclave pyrolysis of carbon reinforced composite plastic waste for carbon fibre and chemicals recovery. Journal of the Energy Institute, 86 (4), pp. 227-232.

Onwudili, Jude A. and Williams, Paul T. (2013). Enhanced methane and hydrogen yields from catalytic supercritical water gasification of pine wood sawdust via pre-processing in subcritical water. RSC advances, 3 (30), pp. 12432-12442.

Ouadi, M., Brammer, J.G., Kay, M. and Hornung, A. (2013). Fixed bed downdraft gasification of paper industry wastes. Applied Energy, 103 , pp. 692-699.

Ouadi, M., Brammer, J.G., Yang, Yang, Hornung, A. and Kay, Martin (2013). The intermediate pyrolysis of de-inking sludge to produce a sustainable liquid fuel. Journal of Analytical and Applied Pyrolysis, 102 , pp. 24-32.

Ouadi, Miloud (2013). Sustainable energy from paper industry wastes. PHD thesis, Aston University.

Panaser, Amandeep (2013). The nature and fate of ocular lipids in contact lens wear. PHD thesis, Aston University.

Patel, Manisha (2013). Pyrolysis and gasification of biomass and acid hydrolysis residues. PHD thesis, Aston University.

Phusunti, Neeranuch (2013). Pryolytic and kinetic study of Chlorella Vulgaris under isothermal and non-isothermal conditions. PHD thesis, Aston University.

Pullan, Nikki, Liu, Max and Topham, Paul D. (2013). Reversible addition–fragmentation chain transfer polymerization of 2-chloro-1,3-butadiene. Polymer Chemistry, 4 (7), pp. 2272-2277.

Runstrom, Gunilla (2013). Albumin in tears. PHD thesis, Aston University.

Samanya, Janat (2013). Increase of energy recovery from sewage sludge. PHD thesis, Aston University.

Sohdi, Arun (2013). Investigating polymer-peptide conjugates and electrospinning for the production of advanced materials. PHD thesis, Aston University.

Wang, Ning, Burugapalli, Krishna, Song, Wenhui, Halls, Justin, Moussy, Francis, Zheng, Yudong, Ma, Yanxuan, Wu, Zhentao and Li, Kang (2013). Tailored fibro-porous structure of electrospun polyurethane membranes, their size-dependent properties and trans-membrane glucose diffusion. Journal of Membrane Science, 427 , pp. 207-217.

Wright, Daniel G., Dey, Prasanta K. and Brammer, John G. (2013). A fuzzy levelised energy cost method for renewable energy technology assessment. Energy Policy, 62 , pp. 315-323.

Wu, Zhentao, Faiz, Rami, Li, Tao, Kingsbury, Benjamin F.K. and Li, K. (2013). A controlled sintering process for more permeable ceramic hollow fibre membranes. Journal of Membrane Science, 446 , pp. 286-293.

Xiao, Bo, Yuan, Qingchun and Williams, Richard A. (2013). Exceptional function of nanoporous metal organic framework particles in emulsion stabilisation. Chemical Communications, 49 (74), pp. 8208-8210.

Yuan, Qingchun, Jia, Xiaodong and Williams, Richard A. (2013). Validation of a multi-component digital dissolution model for irregular particles. Powder Technology, 240 , pp. 25-30.

Zakaria, Zainoha, Islam, Md. Saiful, Hassan, Azman, Mohamad Haafiz, M. K., Arjmandi, Reza, Inuwa, I. M. and Hasan, M. (2013). Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites. Advances in Materials Science and Engineering, 2013 ,

This list was generated on Fri Jul 10 02:04:16 2020 BST.