Items where Division is "Engineering & Applied Sciences" and Year is 1972

Up a level
Export as [feed] Atom [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | G | H | K | L | M | N | R | S | T | W
Number of items: 23.

A

Arnaouti, Christakis (1972). Yield criteria for reinforced concrete slabs. PHD thesis, Aston University.

B

Band, Jennifer E. (1972). Addition agent behaviour in acid tin plating. Masters thesis, Aston University.

Barrett, Philip L. (1972). The influence of fluorides on the microcracking of electrodeposited chromium. Masters thesis, Aston University.

Bery, Mahendra K. (1972). Microbial upgrading of cellulose-based materials. PHD thesis, Aston University.

Bhargava, Suresh C. (1972). Non-synchronous operation of a hysteresis machine. PHD thesis, Aston University.

Bhattacharya, Sabyasachi (1972). In-process weld quality monitoring techniques for resistance-spot welds. PHD thesis, Aston University.

C

Connell, K.A. (1972). The study of gamma-rays produced in the inelastic scattering of neutrons. PHD thesis, Aston University.

G

Griffiths, I.G. (1972). Analysis of the procedures associated with the decision to sub-contract work. Masters thesis, Aston University.

H

Hawksford, Malcolm J. (1972). Application of delta-modulation to television systems. PHD thesis, Aston University.

Hughes, Norman P. (1972). High strength powder metallurgy materials. Masters thesis, Aston University.

K

Kramer, A.E. (1972). Constant shear along a boundary of a flume. PHD thesis, Aston University.

L

Lee, Peter K. (1972). An analysis of the effect of process parameters on the formability of sheet metal. PHD thesis, Aston University.

M

Majed, R.I. (1972). The plastic behaviour of composite floor systems in relation to multi-storey structures. PHD thesis, Aston University.

Mason, P.M. (1972). The strength and behaviour of brickwork in flexure. PHD thesis, Aston University.

N

Newman, Robert M. (1972). The growth, structure and properties of sputtered barium titanate thin films. PHD thesis, Aston University.

Nield, Philip N. (1972). The remote measurement of phase angle. PHD thesis, Aston University.

R

Ramsden, Victor S. (1972). The loss in solid poles of synchronous machines on load. PHD thesis, Aston University.

S

Salmon, Leslie T.J. (1972). A study of field emission from cadmium sulphide. PHD thesis, Aston University.

Spooner, Edward (1972). Air-gap wound altemators for large-scale power generation. PHD thesis, Aston University.

T

Terry, Philip (1972). The fracture toughness of low alloy steel. PHD thesis, Aston University.

W

Wainwright, P.J. (1972). Ultimate strength in bending and torsion of prestressed beams reinforced with longitudinal steel only. PHD thesis, Aston University.

Wilkinson, Rosemary (1972). The corrosion of surgical implants. PHD thesis, Aston University.

Williams, N.B. (1972). Solidification and cooling of grey cast iron in shell moulds with particular reference to the sub-surface structure. Masters thesis, Aston University.

This list was generated on Wed May 22 02:30:52 2019 BST.