Items where Division is "College of Engineering & Physical Sciences" and Year is 1973

Thesis

Ballard, Terence D. (1973). Steady state thermal performance of a high temperature reactor fuel element. PHD thesis, Aston University.

Bowden, Alan L. (1973). A study of magnetic non-linearity and finite length effects in solid iron subjected to a travelling MMF wave. PHD thesis, Aston University.

Bray, K.H.M. (1973). Computer analysis of large civil engineering structures. PHD thesis, Aston University.

Chard, Robert Alan (1973). The development of a computer based data acquisition and processing system. Masters thesis, Aston University.

Coy, Richard C. (1973). Physical analysis of worn surfaces formed under extreme pressure lubrication conditions. PHD thesis, Aston University.

Deeble, R.H. (1973). Non-linear analysis of reinforced concrete frames. PHD thesis, Aston University.

Eastham, Leonard (1973). Computer aided design-information retrieval system in a conventional mode for the selection of building components. PHD thesis, Aston University.

Fisher, John (1973). The Electrical and Mechanical Properties of Electrographite-Metal Interfaces. PHD thesis, Aston University.

Harley, M.J. (1973). Computer Aided Design and Operation of Reservoirs. PHD thesis, Aston University.

Hilleard, Ronald J. (1973). An X-ray diffraction study of chromite spinels. PHD thesis, Aston University.

Howard, G.F. (1973). A Study of the Correspondence Rule in a Viscoelastic Stress Analysis. Masters thesis, Aston University.

Martin, L.H. (1973). A theoretical investigation into the ultimate strength in bending and torsion of plain and reinforced concrete members. PHD thesis, Aston University.

Maybury, Alan (1973). An Investigation of the Failure Mechanisms of a Carbon Fibre Reinforced Composite Material in Bending. PHD thesis, Aston University.

Phillips, R.H. (1973). High Temperature Cracking in the Weld Heat Affected Zone of High Strength Ferritic Steels. PHD thesis, Aston University.

Salter, Ian W. (1973). An Investigation into some Properties of Thin and Ultra Thin Niobium Films. PHD thesis, Aston University.

Scrimshire, David A. (1973). Theoretical Analysis of Gas Exchange in a Lung Model. PHD thesis, Aston University.

Sidhu, J.S. (1973). The application of finite element theory to curved elements. PHD thesis, Aston University.

Skedge, N.C. (1973). Houses and their repair - an economic study. Masters thesis, Aston University.

Thomas, C.P. (1973). Mechanical properties of heavily overconsolidated clays : laboratory investigation of the compressibility of lower lias clay. PHD thesis, Aston University.

Tripathi, Jagat N. (1973). Studies of rectangular-wave modulation and pulse-interval modulation systems. PHD thesis, Aston University.

Walls, John M. (1973). The characterisation of clean metal surfaces. PHD thesis, Aston University.

Wong, S.C. (1973). Quality control in Midland industry. Masters thesis, Aston University.

Yates, John (1973). Second breakdown in transistors. PHD thesis, Aston University.

Young, M.J.R. (1973). A study of the mechanics of ultrasonic deep drawing using a simulative test. PHD thesis, Aston University.

Önen, Yusuf H. (1973). Elastic-plastic analysis of complete building structures. PHD thesis, Aston University.