Low-loss waveguides fabricated by femtosecond chirped-pulse oscillator

Dubov, Mykhaylo, Mezentsev, Vladimir and Bennion, Ian (2010). Low-loss waveguides fabricated by femtosecond chirped-pulse oscillator. IN: International Conference of Advanced Laser Technologies. 2010-09-11 - 2010-09-16. (Unpublished)

Abstract

Recent results on direct femtosecond inscription of straight low-loss waveguides in borosilicate glass are presented. We also demonstrate lowest ever losses in curvilinear waveguides, which we use as main building blocks for integrated photonics circuits. Low-loss waveguides are of great importance to a variety of applications of integrated optics. We report on recent results of direct femtosecond fabrication of smooth low-loss waveguides in standard optical glass by means of femtosecond chirped-pulse oscillator only (Scientific XL, Femtolasers), operating at the repetition rate of 11 MHz, at the wavelength of 800 nm, with FWHM pulse duration of about 50 fs, and a spectral widths of 30 nm. The pulse energy on target was up to 70 nJ. In transverse inscription geometry, we inscribed waveguides at the depth from 10 to 300 micrometers beneath the surface in the samples of 50 x 50 x 1 mm dimensions made of pure BK7 borosilicate glass. The translation of the samples accomplished by 2D air-bearing stage (Aerotech) with sub-micrometer precision at a speed of up to 100 mm per second (hardware limit). Third direction of translation (Z-, along the inscribing beam or perpendicular to sample plane) allows truly 3D structures to be fabricated. The waveguides were characterized in terms of induced refractive index contrast, their dimensions and cross-sections, mode-field profiles, total insertion losses at both 633 nm and 1550 nm. There was almost no dependence on polarization for the laser inscription. The experimental conditions – depth, laser polarization, pulse energy, translation speed and others, were optimized for minimum insertion losses when coupled to a standard optical fibre SMF-28. We found coincidence of our optimal inscription conditions with recently published by other groups [1, 3] despite significant difference in practically all experimental parameters. Using optimum regime for straight waveguides fabrication, we inscribed a set of curvilinear tracks, which were arranged in a way to ensure the same propagation length (and thus losses) and coupling conditions, while radii of curvature varied from 3 to 10 mm. This allowed us to measure bend-losses – they less than or about 1 dB/cm at R=10 mm radius of curvature. We also demonstrate a possibility to fabricate periodical perturbations of the refractive index in such waveguides with the periods using the same set-up. We demonstrated periods of about 520 nm, which allowed us to fabricate wavelength-selective devices using the same set-up. This diversity as well as very short time for inscription (the optimum translation speed was found to be 40 mm/sec) makes our approach attractive for industrial applications, for example, in next generation high-speed telecom networks.

Divisions: Engineering & Applied Sciences > Electrical, electronic & power engineering
Engineering & Applied Sciences > Institute of Photonics
Additional Information: © The Authors
Event Title: International Conference of Advanced Laser Technologies
Event Type: Other
Event Dates: 2010-09-11 - 2010-09-16
Uncontrolled Keywords: direct femtosecond inscription,straight low-loss waveguides,borosilicate glass,curvilinear waveguides,integrated photonics circuits,direct femtosecond fabrication,femtosecond chirped-pulse oscillator,high-speed telecom networks
["eprint_fieldopt_dates_date_type_" not defined] Date: 2010-09-12
Authors: Dubov, Mykhaylo ( 0000-0002-6764-683X)
Mezentsev, Vladimir ( 0000-0002-8415-1767)
Bennion, Ian

Export / Share Citation


Statistics

Additional statistics for this record