Shear induced toughening in bonded joints:experiments and analysis

Swadener, J.G., Liechti, K.M. and Liang, Y.-M. (2002). Shear induced toughening in bonded joints:experiments and analysis. International Journal of Fracture, 114 (2), pp. 113-132.

Abstract

Bonded joint specimens were fabricated from composite adherends and either an epoxy or a urethane adhesive. In mixed-mode fracture experiments, the epoxy bonded specimens generally failed by subinterfacial fracture in the composite, while specimens bonded with urethane failed very close to the adhesive/substrate interface. For the epoxy bonded specimens, fracture toughness did not change significantly with mode-mix, but for urethane bonded joints, fracture toughness increased with increasing shear load. Finite element analysis, which modeled specimens bonded with the two adhesives, showed similar trends. The different toughening behaviors for the two bonded joints can be attributed to dissipation of energy through inelastic deformation, which was insignificant in the epoxy-bonded joints but substantial when the urethane was used as the bonding agent.

Publication DOI: https://doi.org/10.1023/A:1015013618976
Divisions: Engineering & Applied Sciences > Mechanical engineering & design
Engineering & Applied Sciences
Additional Information: Copyright 2008 Elsevier B.V., All rights reserved.
Uncontrolled Keywords: fracture,adhesively bonded joints,cohesive zone model ,geometric moiré,finite element analysis,mixed-mode fracture toughness
Full Text Link: http://link.springer.com/article/10.1023%2FA%3A1015013618976
Related URLs: http://www.scopus.com/inward/record.url?scp=0036506592&partnerID=8YFLogxK (Scopus URL)
Published Date: 2002-03-01
Authors: Swadener, J.G. ( 0000-0001-5493-3461)
Liechti, K.M.
Liang, Y.-M.

Export / Share Citation


Statistics

Additional statistics for this record