Verification and validation of numerical models of the transport of insulation debris

Cartland Glover, G.M., Kratzsch, A., Krepper, E., Renger, S., Seeliger, A., Zacharias, F., Alt, S., Kästner, W., Kryk, H. and Weiss, F. P. (2011). Verification and validation of numerical models of the transport of insulation debris. IN: Proceedings of the 14th International Topical Meeting on Nuclear Reactor Thermalhydraulics (NURETH-14). ASME.


Damage to insulation materials located near to a primary circuit coolant leak may compromise the operation of the emergency core cooling system (ECCS). Insulation material in the form of mineral wool fiber agglomerates (MWFA) maybe transported to the containment sump strainers, where they may block or penetrate the strainers. Though the impact of MWFA on the pressure drop across the strainers is minimal, corrosion products formed over time may also accumulate in the fiber cakes on the strainers, which can lead to a significant increase in the strainer pressure drop and result in cavitation in the ECCS. An experimental and theoretical study performed by the Helmholtz-Zentrum Dresden-Rossendorf and the Hochschule Zittau/Görlitz is investigating the phenomena that maybe observed in the containment vessel during a primary circuit coolant leak. The study entails the generation of fiber agglomerates, the determination of their transport properties in single and multi-effect experiments and the long-term effect that corrosion and erosion of the containment internals by the coolant has on the strainer pressure drop. The focus of this paper is on the verification and validation of numerical models that can predict the transport of MWFA. A number of pseudo-continuous dispersed phases of spherical wetted agglomerates represent the MWFA. The size, density, the relative viscosity of the fluid-fiber agglomerate mixture and the turbulent dispersion all affect how the fiber agglomerates are transported. In the cases described here, the size is kept constant while the density is modified. This definition affects both the terminal velocity and volume fraction of the dispersed phases. Note that the relative viscosity is only significant at high concentrations. Three single effect experiments were used to provide validation data on the transport of the fiber agglomerates under conditions of sedimentation in quiescent fluid, sedimentation in a horizontal flow and suspension in a horizontal flow. The experiments were performed in a rectangular column for the quiescent fluid and a racetrack type channel that provided a near uniform horizontal flow. The numerical models of sedimentation in the column and the racetrack channel found that the sedimentation characteristics are consistent with the experiments. For channel suspension, the heavier fibers tend to accumulate at the channel base even at high velocities, while lighter phases are more likely to be transported around the channel.

Divisions: Engineering & Applied Sciences > Systems analytics research institute (SARI)
Engineering & Applied Sciences > Mathematics
Additional Information: CD-ROM Subsequently submitted to a Special Issue of the Journal of Computational Multiphase Flows
Event Title: 14th International Topical Meeting on Nuclear Reactor Thermalhydraulics
Event Type: Other
Event Dates: 2011-09-25 - 2011-09-29
Uncontrolled Keywords: mineral wool fiber agglomerates,loss of coolant accidents,containment sump,computational fluid dynamics,multiphase flow
Full Text Link:
Related URLs:
Published Date: 2011-09-25
Authors: Cartland Glover, G.M. ( 0000-0002-2647-2757)
Kratzsch, A.
Krepper, E.
Renger, S.
Seeliger, A.
Zacharias, F.
Alt, S.
Kästner, W.
Kryk, H.
Weiss, F. P.

Export / Share Citation


Additional statistics for this record